- ページ 7

コントロールパネル DYNACO Dynalogix IIのPDF 電気マニュアルをオンラインで閲覧またはダウンロードできます。DYNACO Dynalogix II 12 ページ。

Setting Limits

2.2

Optional Dual Height Limit

If door was not purchased with the dual height option ignore this section

STOP

DYNACO USA, INC,

1. Press and hold both PROGRAM buttons until display changes to Password.

After display changes, release buttons.

2. Press and release either red arrow buttons to scroll to 562.

3. Press the ENTER button. Display will change to: Limit Set.

4. Press and release the ENTER button to enter limit menu. Display should

change to: ClsLimit.

5. Press and release either red arrow buttons to scroll to the limit desired to

set or adjust. (Choices: ClsLimit, OpnLimit, PhtLimit and PasLimit)

6. Press the ENTER button. Display will change to:

JogTo(limitchosen)_Enter.

7. Press the JOG DOWN or JOG UP/RESET button to bring the door down or

up to desired limit position.

8. Press the ENTER button to save desired limit. Display should change to:

(chosen limit)_Set--OK.

9. Press and release the red arrow buttons to scroll to another limit or exit by

pressing and releasing the MENU button twice. Display will change to

Ready.

Note: Password number will be stored for 4 minute after entering it in. Entering

program mode at this time will not require reentering of password number.

1. Press and hold both PROGRAM buttons until display changes to: Password

After display changes release buttons.

2. Press and release the up red arrow buttons to scroll to 562.

3. Press the ENTER button. Display will change to Limit Set.

4. Press and release the ENTER button to enter limit menu. Display will

change to: ClsLimit.

5. Press the red arrow buttons to scroll through the menu to PasLimits.

6. Press the ENTER button. Display will change to: JogToPas_Enter

7. Press the JOG DOWN or JOG UP button to bring the door down/UP to

desired second height position.

8. Press the ENTER button to save limit setting. Display will change to:

PasLimit_Set—OK.

9. Press and release the MENU button twice and the display changes to Ready.

Note: Password number will be stored for 4 minute after entering it in. Entering

program mode at this time will not require reentering of password number.

The Leader in Door Safety & Design