- ページ 6
コントロールユニット Agrilight Agribox XのPDF ユーザーマニュアルと組み立て説明書をオンラインで閲覧またはダウンロードできます。Agrilight Agribox X 10 ページ。
ページを印刷するPLC (Agribox Medium)
PLC Settings
No changes or modifications may be made to soft-
ware - this renders the warranty invalid. Any changes
made to the software can be read out, i.e. made
visible if any changes have been made. The settings
below do not fall under the above-mentioned software
restrictions and may be set as desired.
1. Display
2. Delete
3. -- (no function)
4. Back (Escape)
5. Confirming opening menu and changing value parameters
6. Move cursor to increase value parameter
7. Move cursor to decrease value parameter
8. Scrolling back through parameter menu
9. Scrolling forwards through parameter menu
Setting Time and Date
1.
Press button
2.
Press arrow
to select 'Set Clock'
3.
Press button
4.
Press button
again
5.
Press button
again
6.
Set hours using arrow
7.
After setting the desired hour, press button
minutes
8.
Press (+1 min.) arrow
9.
Press button -
the time is now set
10. Press arrow
to set date
11. Press button
12. Set the day parameter by using the arrow
and
(-1 day)
13. After setting the day parameter, use the arrow
month
14. Set the month parameter by using the arrow
and
(-1 month).
15. Press button
16. Press the arrow
to set the year
17. Press button
18. Set the year parameter by using the arrow
and
(-1 year)
19. Press button
To leave the menu, keep pressing the button
until Agrilight is displayed.
6
(+ 1 hour) and
(-1 hour)
to set
and
(-1 min.) to set minutes
(+1 day)
to set the
(+1 month)
(+1 year)
Clock program
The PLC has 3 pre-programmed clock programs
The fourth clock program can be freely programmed.
Options include:
Pr. 00000 = Clock program 1:
turn on lighting at 05:00 hrs, switch off at 21:00 hrs
Pr. 00001 = Clock program 2:
turn on lighting at 6.00 hrs, switch off at 22.00 hrs
Pr. 00002 = Clock program 3:
turn on lighting at 7.00 hrs, switch off at 23.00 hrs
Pr. 00003 = Clock program 4:
clock can be programmed as desired
[standard at 06:00 hrs-22:00 hrs].
These clock programs can be used to set seasonal lighting
parameters.
Selecting clock program
1. Press the arrow
and keep pressed for 10 seconds.
2. Then press the arrow
correct program is selected.
Changing clock times to set new time in clock program 4.
1. Press
2. Press arrow
and select parameter
3. Press
4. Select clock 4
5. Press arrow
or
to select days, hours and minutes
6. Press
to changes settings
7. Press
or
to make changes
8. Press
to confirm changes
9. Press
to return to the previous menu
Operating hours counter
Press arrow
to view operating hours. The unit automatically
displays the number of operating hours of Group 1, Group 2 and
the night lighting.
After 30 secs. the display will automatically return to the main
menu.
Safeguarding program
When switched on for the first time, it will take 10 minutes
before the day-lighting can be switched on.
If the lights are on, the day-lighting can be switched off
manually.
In emergency situations, always disconnect the unit from the
power supply by using the yellow-red main switch.
or
and keep pressed until the