- ページ 2
DVR DynaColor DG80IIのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。DynaColor DG80II 14 ページ。 Versatile h.264 dvr
ページを印刷する11
Power Key
12
Direction Keys
13
ENTER
14
Shuttle/ Jog
Rear Panel
RS232
1
e-SATA
2
(for Record)
e-SATA
3
(for Export)
LAN 10/100/1000M
4
(RJ-45)
USB Port
5
Audio
6
Alarm
I/O
7
RS-485
Main Monitor –
8
VGA
Main Monitor –
9
Digital Output
Call Monitor
10
(BNC)
Main Monitor-
11
BNC
Video In
12
(BNC)
Power Jack
13
2
Press and hold this key to trigger the quick shutdown function.
1. In Zoom mode, these keys function as normal direction keys.
2. In the OSD setup menu, the direction keys are used to move the
cursor to previous or next fields. To change the value in the selected
field, press UP / DOWN keys.
1. In OSD menu or selection interface, press these key to make the
selection or save settings.
2. In live full-screen viewing mode, press this key to view a 2× zoom
image; press it again to return.
This is used to control playback operations.
The RS232 communication port is for connection to a POS device.
Users can connect an e-SATA storage device via this port to expend
HDD capacity of the DVR.
Users can connect an e-SATA storage device via this port to export
recorded videos in the DVR.
The DVR is capable of networking. Once the unit is connected to the
LAN network, users can remotely access the DVR through the remote
software on a PC.
This USB port allows users to connect a USB mouse with PS/2
protocol.
A D-Sub Audio connector is provided for the DVR to connect audio
source devices and Main/Call monitors audio ouput devices.
&
The DVR provides alarm I/O and RS485 ports that offer users the
flexibility required to connect the DVR to other devices.
The DVR can connect a VGA monitor via the VGA connector.
The DVR can connect to a Digital Output monitor via an optional
Digital Output connector.
The call monitor is used to display full screen video of all installed
cameras in sequence. The BNC Call Monitor connector allows users
to connect the DVR with an optional call monitor.
The DVR can connect to a monitor via a BNC connector.
A group of BNC connectors is provided for video input streams from
installed cameras.
The DVR has a 12V DC power connection jack. Please connect the
power supply adapter shipped with the unit.