- ページ 4

水ポンプ GREAT PLAINS HP-100 Dual-FloのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。GREAT PLAINS HP-100 Dual-Flo 4 ページ。 Petroleum hand pump

SPECIFICATIONS

®
The HP-100 DUAL-FLO
Petroleum Hand Pump is compat-
ible with a wide variety of petroleum products and fits any
container with a 2-inch NPT bung.
Construction
Lightweight, die-cast aluminum hous-
ing. Stainless steel piston shaft and
liner. Buna-N seals. Built-in air valve to
prevent leakage at the nozzle.
Pumping Capacity 1/2 gallon (1.9 litres) per stroke cycle.
Pumping Settings
1/2 gallon setting for high volume, high
resistance.
1/4 gallon setting for low volume, low
resistance.
Inlet
Standard 1-inch NPT pipe.
Outlet
Standard 3/4-inch NPT pipe.
Shipping Weight
14 lbs.
Hose and Nozzle
3/4 inch x 8 foot Buna-N hose. Thermo-
plastic unleaded nozzle. Built-in nozzle
holder.
Suction Pipe
Plastic, adjustable 22 to 40 inches.
Great Plains Industries, Inc. 5252 E. 36
defects in material and workmanship on all products manufactured by Great Plains Industries, Inc. except models BP-10, BP-12, CP-5,
D-12, D-24, D-115, D-230, LP-50 and RP-5. These models carry a 90-day warranty. The warranty shall extend to the purchaser of this
product and to any person to whom such product is transferred during the warranty period.
The warranty period shall begin on the date of the original new equipment purchase. Warrantor's obligation hereunder shall be limited to
repairing defective workmanship or replacing or repairing any defective part or parts. This warranty shall not apply if:
A.
the product has been altered or modified outside the warrantor's duly appointed representative;
B.
the product has been subjected to neglect, misuse, abuse or damage or has been installed or operated other than in accordance
with the manufacturer's operating instructions.
To make a claim against this warranty, notice of claim must be given in writing to the company at its above address no later than 30 days
after the expiration of the warranty period. Such notice shall identify the defect in the product. The company shall, within 14 days of receipt
of such notice, notify the customer to either send the product, transportation prepaid, to the company at its office in Wichita, Kansas, or
to duly authorized service center. The company shall perform all obligations imposed on it by the terms of this warranty within 60 days of
receipt of the defective product.
GREAT PLAINS INDUSTRIES, INC. EXCLUDES LIABILITY UNDER THIS WARRANTY FOR DIRECT, INDIRECT, INCIDENTAL AND
CONSEQUENTIAL DAMAGES INCURRED IN THE USE OR LOSS OF USE OF THE PRODUCT WARRANTED HEREUNDER.
The company herewith expressly disclaims any warranty of merchantability or fitness for any particular purpose other than for which it was
designed.
This warranty gives you specific rights and you may also have other rights which vary from U.S. state to U.S. state.
Note: In compliance with MAGNUSON MOSS CONSUMER WARRANTY ACT – Part 702 (governs the resale availability of the warranty
terms).
U.S. Patent D 308,567
Dual-Flo and GPI are registered trademarks of
Great Plains Industries, Inc.
© 2002 by GREAT PLAINS INDUSTRIES, INC., Wichita, KS
Printed in U.S.A.
11/02
Limited Warranty Policy
th
Street North, Wichita, KS USA 67220-3205, hereby provides a limited two year warranty against
PARTS AND SERVICE
For warranty consideration, parts or other service informa-
tion, please contact your local distributor or the GPI Cus-
tomer Service Department in Wichita, Kansas, during normal
business hours.
1-800-835-0113
To obtain prompt, efficient service, be prepared with the
following information:
• The model number of your pump.
• The manufacturing date of your pump.
• Part descriptions and numbers.
Part descriptions and numbers can be obtained from the
Illustrated Parts Drawing.
For warranty service, be prepared with your original sales slip
or other evidence of purchase date.
" A G r e a t P l a i n s Ve n t u r e s S u b s i d i a r y "
www.gpi.net
1-800-835-0113
5252 East 36th Street North
Wichita, KS USA 67220-3205
TEL: 316-686-7361
FAX: 316-686-6746
Rev. -
921407-09