ページを印刷するTall Units
1. Please note that the tall units can be mounted as both right hand
and left hand door opening.
2. Position the unit in a suitable location. Carefully mark the desired
position of the unit using a soft pencil.
3. Using a spirit level, mark a horizontal line below the pencil mark,
taking into account the location of the split baton style furniture
hanger. Place mounting baton on the pencil line and carefully mark
the position of the holes using a soft pencil.
4. Before drilling, ensure there are no hidden cables or pipes
behind the mounting points. Using a suitable drill bit, drill holes
in the marked positions to a suitable depth.
5. Insert wall plugs level with the surface of the wall. If fitting to a tiled
surface, wall plugs should be inserted below the tile surface to avoid
cracking. NB. For plasterboard walls, specialist heavy duty fixings
should be purchased from any DIY or hardware store.
6. Fix the mounting baton to the wall using the screws provided
7. Hang the tall unit onto the wall baton, ensuring that it is securely
seated.
8. If necessary, the door(s) can be adjusted to align them with the tall
unit carcass. This is done by adjusting the small screws on the hinges
(see
Fig.
8).
9. In order to adjust the position of the shelves (please note that the
centre shelf is fixed and not removable), the doors must first be
removed (see
Fig.
shelf studs and reinsert them in the required position. Replace doors.
A
Fig. 8
Cleaning
To preserve the high quality finish of your HiB product, please ensure you regard the following care
and cleaning recommendations:
• Use only a soft damp cloth.
• Wipe off all water spillages as soon as possible
• DO NOT USE any abrasives or solvents.
Aftercare Service
In the unlikely event that this product should fail please contact HiB customer services, contact details
shown below.
T:
+44 (0)20 8441 0352
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and
make sure they are as accurate as possible. In the interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.
7). Once the door is removed, simply remove the
F:
+44 (0)20 8441 0219
(Fig.
6).
(Fig.
B
E:
6).
Fig. 6
Fig. 7
C
hibnovum.co.uk