- ページ 4

おもちゃ GREAT PLANES Cosmic WindのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。GREAT PLANES Cosmic Wind 20 ページ。

ページを印刷する

❍ Great Planes AC/DC Triton2 EQ Charger/Balancer

(GPMM3156)

Throughout the life of a LiPo battery, the individual cells

located inside the battery may become unbalanced. These

unbalanced cells can shorten the life of the battery or cause

it to malfunction. For this reason, it is always recommended

that a cell balancer be used when charging LiPo batteries.

The ElectriFly Equinox

™

with any LiPo charger and is capable of maintaining the cell

balance of the battery. Note: The AC/DC Triton2 EQ does not

require a cell balancer.

❍ Great Planes ElectriFly Equinox LiPo Cell Balancer

[GPMM3160]

ADDITIONAL ITEMS REQUIRED

Required Adhesives and Supplies

This is the list of adhesives and building supplies required

to finish the Cosmic Wind EP. Order numbers are provided

in parentheses.

❍ 1/2 oz. [15g] Thin Pro

❍ Pro 30-minute epoxy (GPMR6047)

❍ Canopy Glue (PAAR3300)

❍ Threadlocker thread locking cement (GPMR6060)

❍ Denatured alcohol (for epoxy clean up)

❍ Paper Towels

❍ Masking Tape

❍ Drill bits: 3/32" [2.4 mm] 3/64" or #60 [1mm]

❍ #1 Hobby knife (HCAR0105)

❍ #11 blades (5-pack, HCAR0211)

❍ Small T-pins (100, HCAR5100)

❍ Non-elastic monoﬁ lament or Kevlar ﬁ shing line (for

stabilizer alignment)

❍ Fine Line Marker

Optional Supplies and Tools

Here is a list of optional tools mentioned in the manual that

will help you build the Cosmic Wind EP.

❍ 2 oz. [57g] spray CA activator (GPMR6035)

❍ CA applicator tips (HCAR3780)

❍ CA debonder (GPMR6039)

❍ Epoxy brushes (6, GPMR8060)

❍ Mixing sticks (50, GPMR8055)

❍ Mixing cups (GPMR8056)

❍ AccuThrow

™

Deﬂ ection Gauge (GPMR2405)

❍ CG Machine

™

(GPMR2400)

❍ 21

Century

sealing iron [COCR2700]

❍ 21

Century iron cover [COVR2702]

❍ Soldering Iron

❍ Straightedge

is a cell balancer that may be used

™

CA (GPMR6001)

IMPORTANT BUILDING NOTES

● There are two types of screws used in this kit:

Sheet Metal Screws are designated by a number and a

length. For example #6 × 3/4" [19mm].

This is a number six screw

that is 3/4" [19mm] long.

Machine Screws are designated by a number, threads

per inch, and a length. For example

4-40 × 3/4" [19mm].

This is a number four screw

that is 3/4" [19mm] long with

forty threads per inch.

● When you see the term test ﬁ t in the instructions, it means

that you should ﬁ rst position the part on the assembly

without using any glue, then slightly modify or custom ﬁ t

the part as necessary for the best ﬁ t.

● Whenever the term glue is written you should rely upon

your experience to decide what type of glue to use. When

a speciﬁ c type of adhesive works best for that step, the

instructions will make a recommendation.

● We recommend 30-minute epoxy only, because you will

need the working time to position the part correctly and

the additional strength.

● Photos and sketches are placed before the step they refer

to. Frequently you can study photos in following steps to

get another view of the same parts.

● The Cosmic Wind EP is factory-covered with Top Flite

MonoKote

ﬁ lm. Should repairs ever be required, MonoKote

can be patched with additional MonoKote purchased

separately. MonoKote is packaged in six-foot rolls, but

some hobby shops also sell it by the foot. If only a small

piece of MonoKote is needed for a minor patch, perhaps a

fellow modeler would give you some. MonoKote is applied

with a model airplane covering iron, but in an emergency a

regular iron could be used. A roll of MonoKote includes full

instructions for application. Following are the colors used

on this model and order numbers for six foot rolls.

Missile Red - TOPQ0201

Jet White - TOPQ0204

KIT INSPECTION

Before starting to build, take an inventory of this kit to make

sure it is complete, and inspect the parts to make sure they

are of acceptable quality. If any parts are missing or are not

of acceptable quality, or if you need assistance with assembly,

contact Product Support. When reporting a defective or

missing part, use the part names exactly as they are written

in the Kit Contents list.

Great Planes Product Support

3002 N Apollo Drive, Suite 1

Champaign, IL 61822

E-mail: [email protected]

Ph: (217) 398-8970, ext. 5

Fax: (217) 398-7721