- ページ 8

車椅子 Days Whirl SPのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Days Whirl SP 8 ページ。 Manual wheelchair

ページを印刷する

Days Healthcare Whirl Wheelchair

User Manual

Adjustment Procedures

Swing-away Footrest

Length Adjustment

Adjustments are made with the user sitting in the

wheelchair with feet on footplates.

1) Use a spanner to loosen the bolt at the rear of the

footrest support hanger.

2) Adjust the footplate up or down as needed to provide

maximum support of thighs on the seat upholstery, then re-tighten the bolt.

WARNING!

Ensure that desired front rigging adjustment does not cause pressure to legs

at front of seat upholstery.

Heel and Calf Straps (if fitted)

Your wheelchair is equipped with heel straps which are secured on the footplates

or calf straps which are attached on the footrest support tubes. The calf straps are

tension adjustable with the aid of Velcro.

Seat Belt (if fitted)

Hold the bayonet end in one hand, and pull on the webbing to increase or de-

crease belt length with the other. When length is correct, adjust slide buckle to

suit.

Anti-tippers (if fitted)

These are fitted at the rear of the chair, adjacent to the rear wheels and Days rec-

ommends that these are fitted, especially when climbing kerbs and gradients.

- 8 -

Operations of Use

Footrests

Your footrests are capable of being rotating outwards. To achieve this pull the

release lever towards you and rotate footrest in the required direction. Lift-off

from the two pivot points to remove.

Armrests (Detachable type)

Both armrests are removable. To operate, push the release lever in to

unclip and lift arm out of front socket and rear sockets.

Manual Brake

This is a parking brake which is applied manually to the tyres when the chair is

parked or stationary. To apply the brake, push the lever forwards until the shoe is

locked in place. Pull backwards to release.

Folding Back

This is available to reduce the overall height of the chair. Whilst at the rear of the

chair, grip the small lever and push down to release pin allowing the handle sec-

tion to be folded.

Folding the Chair

Remove the seat cushion. The wheelchair is folded by grasping

the seat canvas at the front centre with one hand and at the rear

with the other. A simple lifting action will draw both sides of

the chair together into the folded position.

- 9 -