- ページ 3

おもちゃ GREAT PLANES Fling 2m ARFのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。GREAT PLANES Fling 2m ARF 16 ページ。

ページを印刷する

the instructions may differ slightly from the photos. In those

instances the written instructions should be considered

as correct.

3. You must take time to build straight, true and strong.

4. You must use an R/C radio system that is in first-class

condition, and correctly sized components (batteries,

hardware, etc.) throughout the building process.

5. You must correctly install all R/C and other components so

that the model operates correctly on the ground and in the air.

6. You must check the operation of the model before every

flight to insure that all equipment is operating and that the

model has remained structurally sound. Be sure to check

clevises or other connectors often and replace them if they

show any signs of wear or fatigue.

7. If you are not an experienced pilot or have not flown this

type of model before, we recommend that you get the

assistance of an experienced pilot in your R/C club for your

first flights. If you're not a member of a club, your local hobby

shop has information about clubs in your area whose

membership includes experienced pilots.

8. WARNING: The fuselage included in this kit is made of

fiberglass, the fibers of which may cause eye, skin and

respiratory tract irritation. Never blow to remove fiberglass

dust, as the dust will blow back into your eyes. Always wear

safety goggles, a particle mask and rubber gloves when

grinding, drilling and sanding fiberglass parts. Vacuum the

parts and the work area thoroughly after working with

fiberglass parts.

We, as the kit manufacturer, provide you with a top quality,

thoroughly tested kit and instructions, but ultimately the

quality and flyability of your finished model depends on

how you build it; therefore, we cannot in any way

guarantee the performance of your completed model, and

no representations are expressed or implied as to the

performance or safety of your completed model.

Remember: Take your time and follow the instructions to

end up with a well-built model that is straight and true.

DECISIONS YOU MUST MAKE

This is a partial list of items required to finish the Fling 2M ARF

that may require planning or decision making before starting to

build. Order numbers are provided in parentheses.

Radio Equipment

If purchasing a complete system, the Futaba

stick, 3-channel transmitter with R114ZH mini receiver and

two S3003 standard servos is recommended (FUTJ52**).

Replace the "**" with the channel number you wish to order.

(For example, if you wish to order a system on channel 44,

order FUTJ5244).

The 3FR does not come with the battery needed for the

Fling 2M ARF. The Great Planes 4.8V 350mAh NiMH battery

is best suited for this plane and is recommended.

If you are purchasing your components separately, refer to

the following list for guidelines or ordering numbers.

•

Any 2-channel (or more) 72 MHz FM transmitter, such

as the Futaba 3FR (FUTJ52**)

•

Great Planes ElectriFly

crystal (GPML0044 for low band, GPML0045 for high

band) or similar lightweight micro receiver.

•

Low band receiver crystal for Great Planes mini

receivers (channels 11 to 35, FUTL62**)

•

High band receiver crystal for Great Planes mini

receivers (channels 36 to 60, FUTL63**)

•

(2) Micro servos, such as the Futaba S3101 micro

precision servos (FUTM0033)

•

(2) Standard servos, such as the Futaba S3003

servo (FUTM0031)

•

Great

battery (GPMP0950)

•

Hobbico

J-connectors (HCAM2000) (for battery to receiver connection)

Note: An on/off receiver switch is not used. When ready to

fly, the battery is simply connected to the receiver.

ADDITIONAL ITEMS REQUIRED

Adhesives and Building Supplies

This is the list of hardware and accessories required to finish the

Fling 2M ARF. Order numbers are provided in parentheses.

❏

Up-Start 2m (up to 200' launches at sites with 300' or

more launch area) (DYFP8305)

❏

Great Planes Pro

Great Planes Pro 6-minute epoxy (GPMR6042)

❏

Hobbico #1 Hobby knife (HCAR0105)

❏

Hobbico #11 Blades (5-pack, HCAR0211)

❏

Hobbico 1/4" [6 mm] R/C foam rubber – (HCAQ1000)

❏

3/32" [2.4 mm] Drill bit

❏

Great Planes stick-on segmented lead weights (GPMQ4485)

3FR single

™

4-channel mini receiver w/o

-or-

Planes

4.8V

350mAh

6" [153 mm] Command Extension with Futaba

™

30-minute epoxy (GPMR6047) or

NiMH

receiver