- ページ 10

おもちゃ GREAT PLANES Fling DL ARFのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。GREAT PLANES Fling DL ARF 16 ページ。

❏

4. Mount the servos to the servo tray. Optional: To keep

the weight low, use a drop of medium CA through each

servo screw hole instead of the servo screws.

❏

5. Hook the 39" [1m] wire to the center of the remaining

pushrod string. Pull the strings back through the left plastic

pushrod tube around the rudder and forward through the

right pushrod tube.

❏

6. Tie the strings to the servo arms and secure with a

small drop of thin CA.

❏

7. Pull one of the strings on the left side and cut it midway

back on the fin.

❏

8. Slide the cut string that is on the right side of the fuse

through the elevator turnaround.

❏

9. Plug the servos and battery into your receiver. Turn on

the transmitter to center the rudder and elevator servos.

❏

10. Tie the cut ends of the string to the elevator control

horn. The strings need to have some tension on them and

the elevator needs to be aligned with the stab. After you

have confirmed that the elevator is straight and moves full

throw of the servo secure the knots with a drop of thin CA

❏

11. Attach the rudder strings to the control horn, being

sure to keep the rudder straight and the strings tight.