- ページ 3

おもちゃ GREAT PLANES Gee BeeのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。GREAT PLANES Gee Bee 16 ページ。 Model aircraft great planes gee bee

ページを印刷する

We, as the kit manufacturer, provide you with a top quality,

thoroughly tested kit and instructions, but ultimately the

quality and ﬂ yability of your ﬁ nished model depends

on how you build it; therefore, we cannot in any way

guarantee the performance of your completed model,

and no representations are expressed or implied as to the

performance or safety of your completed model.

Remember: Take your time and follow the instructions to

end up with a well-built model that is straight and true.

DECISIONS YOU MUST MAKE

This is a partial list of items required to ﬁ nish the Gee Bee

EP Rx-R that may require planning or decision making before

starting to build. Order numbers are provided in parentheses.

Recommended Batteries

A 2200mAh 11.1V LiPo battery pack is recommended.

❍ Great Planes ElectriFly

(GPMP0520)

❍ FlightPower

EON-X

(FPWP6198)

The Gee Bee EP Rx-R requires a 4-channel transmitter and

receiver.

Recommended Charger

A LiPo compatible charger is required to charge LiPo batteries.

The Great Planes ElectriFly PolyCharge4

LiPo battery packs only; however, it is able to charge four LiPo

battery packs simultaneously. The ElectriFly Triton2

AC/DC Triton2 EQ chargers will only charge one pack at a

time, but are capable of charging NiCd, NiMH, Pb acid and

LiPo batteries.

❍ Great Planes PolyCharge4 DC-Only 4 Output LiPo

Charger (GPMM3015)

❍ Great Planes ElectriFly Triton2 DC Computer Peak

Charger (GPMM3153)

❍ Great Planes AC/DC Triton2 EQ Charger/Balancer

(GPMM3156)

Thoughout the life of a LiPo battery, the individual cells located

inside the battery pack may become unbalanced. These

unbalanced cells can shorten the life of the battery or cause

it to malfunction. For this reason, it is always recommended

that a cell balancer be used when charging LiPo batteries.

LiPo 11.1V 2200mAh 25C

™

30 LiPo 11.1V 2200mAh 30C

Radio

™

is designed for

The ElectriFly Equinox

with any LiPo charger and is capable of maintaining the cell

balance of the battery pack. Note: the AC/DC Triton2 EQ does

not require a cell balancer.

❍ Great Planes ElectriFly Equinox LiPo Cell Balancer

(GPMM3160)

Optional Replacement Prop

❍ APC 10

ADDITIONAL ITEMS REQUIRED

Adhesives and Building Supplies

This is the list of Adhesives and Building Supplies that are

required to ﬁ nish the Gee Bee EP Rx-R.

❍ Phillips Head Screw Driver

❍ Flat Blade Screw Driver

❍ Crescent Wrench

❍ Great Planes Pro CA+ Medium (GPMR6007)

❍ Great Planes CA Activator Foam Safe 2oz. Pump

(GPMR6035)

Optional Supplies and Tools

Here is a list of optional tools mentioned in the manual that

will help you build the Gee Bee EP Rx-R.

❍ CG Machine (GPMR2400)

● Photos and sketches are placed before the step they refer

to. Frequently you can study photos in following steps to

get another view of the same parts.

● The stabilizer and wing incidences and motor thrust angles

have been factory-built into this model. However, some

technically-minded modelers may wish to check these

measurements anyway. To view this information visit the web

™

and the

site at www.greatplanes.com and click on "Technical Data."

Due to manufacturing tolerances which will have little or no

effect on the way your model will ﬂ y, please expect slight

deviations between your model and the published values.

Before starting to build, inspect the parts to make sure

they are of acceptable quality. If any parts are missing or

are not of acceptable quality, or if you need assistance

with assembly, contact Product Support. When reporting

defective or missing parts, use the part names exactly as

they are written in the manual.

Great Planes Product Support

3002 N Apollo Drive, Suite 1

Champaign, IL 61822

E-mail: [email protected]

™

is a cell balancer that may be used



7 Thin Electric Propeller (APCQ4123)

KIT INSPECTION

Ph: (217) 398-8970, ext. 5

Fax: (217) 398-7721