- ページ 20

おもちゃ GREAT PLANES PBY CatalinaのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。GREAT PLANES PBY Catalina 20 ページ。 Arf

No other R/C seaplane looks or ﬂ ies like the Seawind. This sport-scale replica of the classic homebuilt amphibious aircraft

draws attention wherever it's ﬂ own, whether at the ﬂ ying ﬁ eld or the local lake. Substitute optional retracts for the included

ﬁ xed landing gear and you'll be able to ﬂ y from land OR water with the same plane! The ﬁ berglass wingtips offer excellent

stability during ﬂ ight and double as ﬂ oats to support the Seawind on the water. Without the need for bulky suspended ﬂ oats,

the model ﬂ ies faster than typical seaplanes. Assembly moves quickly, too. With its low number of parts, the Seawind ARF

requires only 15-18 hours of building time. The fuselage and wingtips are gel-coated ﬁ berglass. The built-up wing and tail

section are made of balsa and factory-covered in MonoKote. The wing simply plugs into an aluminum joiner and is secured

with nylon bolts — no tools needed. The unique boom-mounted engine design not only enhances the model's looks, but also

reduces the likelihood of water "spray" reaching the engine during takeoff and landing. As your sleek Seawind ARF touches

down gracefully onto the water, it hits you: this is a seaplane like no other, in both looks and performance. GPMA1360

For convenience with multiple LiPo packs,

there's the DC PolyCharge4. Each of its four

independent outputs can charge a one-to-four

cell Lithium-Polymer pack. It's ideal if you don't

have the time for one-at-a-time charging - and

don't want the expense and hassle of multiple

chargers. Each output can handle packs from 300

to 3000mAh. Set the capacity, and PolyCharge4

will automatically set the charge rate to get you

started – and use light and sound cues to tell you

when your pack is done. GPMM3015

Other Items Available from Great Planes

The Seawind name is used with permission of Seawind Inc.

™

Like the full-size Fokker D.VII that challenged Allied air forces in

WWI, this prebuilt park flyer is a spirited performer. And because the

Fokker D.VII park flyer is an ARF, the high-quality, laser-cut wood

parts assemble quickly and easily. Its prebuilt balsa/ply structures

are precovered in a high-quality film. Lots of impressive details are

included, from the vacuum-formed cowl and realistic machine guns

to the scale-shaped landing gear and scale wheels. The cabanes

and interplane struts come already painted and are shaped for easy

installation and proper alignment. An out-runner brushless motor

gives this model a great power-to-weight ratio and long flight times.

The ElectriFly RimFire 28-30-950 motor (GPMG4560) was found to

be ideal for the Fokker D.VII. GPMA1141

Wingspan: 71 in (1805mm)

Wing Area: 676 sq in (43.6dm²)

Weight: 10.25-12.25 lb (4.6-5.5kg)

Wing Loading: 35-41 oz/sq ft (106-127g/dm²)

Length: 56 in (1410mm)

Requires: 2-stroke .60 cu in (10cc) or 4-stroke .70-.91

cu in (11.5-15cc) engine, 5-7 channel radio w/7-9 servos

Wing Loading: 10 oz/ft²

™

Wingspan: 36 in

Wing Area: 360 in²

Weight: 25.7oz

Length: 27 in