- ページ 7
スイッチ CEL-MAR ADA-4044HのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。CEL-MAR ADA-4044H 16 ページ。 Rs-485 / rs-422
ADA-4044H
MASTER
Fig. 4. Star type connection of devices with 4-wires RS485 interface to main 4-wires RS485 bus. Device separation from main
4-wires bus, extending the main bus by a further segments of 1200m, signal amplification, possibility of connection
3.2.2. STAR TYPE CONNECTION FOR 2-WIRE RS485 BUS – CONFIGURATION OF 4-PORT
RS485-OUT
Using the ADA-4044H configured for operating with 4-port, 2-wire RS485 (the microswitch RS-485 PORT in position 2W), it's possible
to:
- connect up to 64 devices with 4-wire RS485 interface in 'star',
- extend the main bus by a further segments of 1200m,
- separate other segments of bus from main network – what increases the operational reliability,
- amplify the RS485 signal.
During the connecting, pay attention to the proper implementation of the connection according to the following drawings.
additional 64 devices.
7
RS485(4W)
connector
Rx+
Rt
Rx-
Tx+
Rt
Tx-
GND
RS485(4W)
connector
Rx+
Rx-
Tx+
Tx-
GND
RS485(4W)
connector
Rx+
Rx-
Tx+
Tx-
GND
SLAVE