- ページ 2

パーソナルケア製品 HiB Eclipse SquareのPDF 固定方法をオンラインで閲覧またはダウンロードできます。HiB Eclipse Square 4 ページ。 Magnifying mirrors

Installation

1. Position the magnifying mirror in a suitable location (according to the zonal diagram

overleaf, Figure 4), ensuring that the domestic electrical mains supply is within reach of the

electrical entry point of the product. Do not position in direct sunlight as the magnifying

effect of the mirror may pose a fire hazard.

2. Remove the wall bracket from the base of the mirror via the fixing(s) on the base of the unit

(see mounting diagram, figures 2&3).

3. Using the wall bracket as a guide, carefully mark the required drilling locations using a

soft pencil, ensuring it is level. Remove the wall bracket. Please ensure all marked drill

positions accurately match up with the fixing points of the wall bracket before drilling.

4. Using a suitable drill bit, drill holes in the marked positions to a suitable depth. If drilling

through tile, use a ceramic drill bit.

5. Insert wall plugs level with the surface of the wall. If fitting to a tiled surface, wall plugs

should be inserted below the tile surface to avoid cracking. NB. For plasterboard walls,

specialist fixings should be purchased, available from any DIY or hardware store.

6. Fix wall bracket into wall plugs.

7. Connect the domestic mains supply to the terminal box according to the wiring diagram

below (figure 1).

8. Place the mirror onto the wall bracket and secure into place using the fixing(s) on the mirror

base – take care not to trap wiring when assembling the mirror onto the wall bracket.

9. Switch on the domestic electrical mains supply to the mirror.

Operation Instructions

Libra - To turn illumination on, simply pull the front of the mirror away from the wall. To turn

the illumination off, simply push the mirror back towards the wall into the off position.

Eclipse - Illumination is switched on and off by the rocker switch on the underside of the mirror

base.

Wiring Diagram (Fig. 1)

Earth is Green and Yellow

LUMINAIRE

Wiring Diagram

Live is Brown

Neutral is Blue

live

Live supply can be Red or Brown

earth

Earth supply is Green and Yellow

neutral

Neutral supply can be Blue or Black

MAINS SUPPLY