- ページ 3

おもちゃ GREAT PLANES YAK-55M YakovlevのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。GREAT PLANES YAK-55M Yakovlev 20 ページ。 Arf plane

ページを印刷する

5. You must correctly install all R/C and other components

so that the model operates correctly on the ground and in

the air.

6. You must check the operation of the model before every

flight to insure that all equipment is operating and that the

model has remained structurally sound. Be sure to check

clevises or other connectors often and replace them if they

show any signs of wear or fatigue.

7. If you are not an experienced pilot or have not flown

this type of model before, we recommend that you get the

assistance of an experienced pilot in your R/C club for your

first flights. If you're not a member of a club, your local

hobby shop has information about clubs in your area whose

membership includes experienced pilots.

8. WARNING: The cowl and wheel pants included in this kit

are made of fiberglass, the fibers of which may cause eye,

skin and respiratory tract irritation. Never blow into a part

(wheel pant, cowl) to remove fiberglass dust, as the dust

will blow back into your eyes. Always wear safety goggles, a

particle mask and rubber gloves when grinding, drilling and

sanding fiberglass parts. Vacuum the parts and the work

area thoroughly after working with fiberglass parts.

We, as the kit manufacturer, provide you with a top quality,

thoroughly tested kit and instructions, but ultimately the

quality and ﬂ yability of your ﬁ nished model depends

on how you build it; therefore, we cannot in any way

guarantee the performance of your completed model,

and no representations are expressed or implied as to the

performance or safety of your completed model.

Remember: Take your time and follow the instructions to

end up with a well-built model that is straight and true.

DECISIONS YOU MUST MAKE

Radio Equipment

The Yak-55M EP requires a 4-channel radio system with four

micro servos such as the Futaba

Servo. For optimum performance, we recommend the Futaba

S3150 Slim Digital Servos.

In addition, three 9" [229mm] servo extensions are required

for the aileron servos and the ESC. Two 16" [405mm] servo

extensions are required for the rudder and elevator servos.

If you are using a radio system that does not support mixing

functions, a Y-harness will also be required to connect the

aileron servos to the receiver.

❏

(4) Futaba S3115 Micro Precision Servos [FUTM0415]

[38.9 oz-in (2.8 kg-cm) of torque]

❏

(4) Futaba S3150 Slim Digital Servos [FUTM0303]

[51.4 oz-in (3.7 kg-cm) of torque]

PLUS

❏

(1) "Y" harness [FUTM4130]

❏

(2) 16" extensions [FUTM3955]

❏

(3) 9" extensions [FUTM3910]

S3115 Micro Precision

Motor/ESC Recommendations

The recommended motor and speed control for the Yak-55M

™

EP is a RimFire

.32 (42-50-800) brushless outrunner motor

and the SS-45A Brushless ESC.

❏

Great Planes RimFire .32 Brushless Outrunner Motor

[GPMG4700]

❏

Great Planes Silver Series SS-45A Brushless ESC

[GPMM1840]]

If using the recommended RimFire .32 Outrunner Motor, we

suggest an APC 12x6E electric propeller [APCQ4130].

Recommended Batteries

If using the suggested motor and prop combination, a

2200mAh 14.8V LiPo battery pack is recommended.

❏

Great Planes ElectriFly LiPo 14.8V 2200mAh 25C

(GPMP0521)

❏

FlightPower

LiPo EOUX30 14.8V 2200mAh 30C

(FPWP6199)

Recommended Charger

A LiPo compatible charger is required to charge LiPo

batteries. The Great Planes ElectriFly PolyCharge4™ is

designed for LiPo packs only; however, it is able to charge

four LiPo packs simultaneously. The ElectriFly Triton2

AC/DC Triton2 EQ chargers will only charge one pack at a

time, but are capable of charging NiCd, NiMH, Pb acid and

LiPo batteries.

❏

Great Planes PolyCharge4 DC-Only 4 Output LiPo

Charger (GPMM3015)

❏

Great Planes ElectriFly Triton2 DC Computer Peak

Charger (GPMM3153)

❏

Great Planes AC/DC Triton2 EQ Charger/Balancer

(GPMM3156)

Throughout the life of a LiPo battery, the individual cells

located inside the battery may become unbalanced. These

unbalanced cells can shorten the life of the battery or cause

it to malfunction. For this reason, it is always recommended

that a cell balancer be used when charging LiPo batteries.

The ElectriFly Equinox™ is a cell balancer that may be used

with any LiPo charger and is capable of maintaining the cell

balance of the battery. Note: The AC/DC Triton2 EQ does not

require a cell balancer.

❏

Great Planes ElectriFly Equinox LiPo Cell Balancer

[GPMM3160]

Propeller

™

and