ページを印刷する
Door Adjustment
(Fig D)
6. Hang the cabinet on the wall ensuring that it is firmly located on the mounting bracket.
7. Once in position make a mark on the wall through the hole in the cabinet (Fig. C). Remove the
cabinet, drill a hole in the wall at the marked position and insert wall plug. Rehang the cabinet and
secure using screw, washer and cover provided.
8. Align doors according to the diagram above. (Fig. D).
9. Starting with the top shelf, insert the shelf supports in the desired position and fit the shelves. (Fig. E).
Operation Instructions
To turn illumination on or off, wave hand under the sensor switch located at the bottom of the cabinet.
Heated Pad is only on when illuminated.
WEEE Compliance
Must not be mixed with general household waste.
Shelf Assembly
(Fig E)
3
hib.co.uk