- ページ 8

コンピュータ・ハードウェア DaySequerra MultiMerge2のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DaySequerra MultiMerge2 19 ページ。 5.1 surround audio processor

Power Connection

The AC power cable supplied with MultiMerge2 must be connected from the IEC320 power entry

module to an AC mains outlet with a functional earth ground connection. For protection against electric

shock and electro-magnetic interference, do not plug the power cable into a ground lifting adapter or

remove the cable's grounding pin. If in doubt, please consult a qualified electrician.

Please connect MultiMerge2 to an uninterruptible power supply (UPS) to protect against power

surges and low-voltage conditions. MultiMerge2 may be combined with other devices on the output

of the UPS as long as the total load is within the UPS' capacity. Consult your UPS manual for details.

MultiMerge2 will automatically power up when AC power is applied. If AC line power is lost or

momentarily interrupted, MultiMerge2 will revert to its previous state.

Front Panel Controls and Indicators

Meters

INPUT LEVELS - Eight 10-segment multi-colored LED meters display the audio level for each channel

of the inbound audio stream.

INPUT LEVELS – LED display shows current amplitude of input signal from

-60dB to 0dB across all active channels. Unused channels will not light the display.

L - Left (AES Input 1)

R - Right (AES Input 2)

C - Center (AES Input 3)

LFE - Low Frequency (AES Input 4)

MultiMerge2 User Manual

Figure 1. LED Meters on Multimerge2

Ls - Left Surround (AES Input 5)

Rs - Right Surround (AES Input 6)

L - Stereo Left (AES Input 7)

R - Stereo Right (AES Input 8)