- ページ 6

煙警報器 Emerald Planet EP-HW-240-R1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Emerald Planet EP-HW-240-R1 6 ページ。
Emerald Planet EP-HW-240-R1 にも： インストール手順 (4 ページ)

ページを印刷する
Emerald Planet EP-HW-240-R1 ユーザーマニュアル

TROUBLESHOOTING

PROBLEM
Green LED does not come on when
connected to the power
Alarm does not sound during testing
The alarm "chirps" and red LED flashes
every 32 seconds
The alarm "chirps" every 32 seconds. (no
led Flash)
Smoke Alarm sounds unnecessarily. (e.g.
for no apparent reason, while cooking,
when someone is showering etc.)
EMERALD PLANET HEAD OFFICE - SYDNEY Unit 2 / 29 Mitchell Road, Brookvale NSW 2100 Australia P 02 9466 6000
TROUBLE SHOOTING
1. Check the AC QUICK CONNECTOR is properly connected to the smoke alarm.
2. If problem persists, replace the smoke alarm.
1. Ensure Alarm is activated before installation. Refer to "Installation" section.
2. Clean smoke alarm. Refer to "Maintenance & Cleaning" section.
3. Contact supplier for advice
1. The battery is low. Replace the battery.
1. Clean smoke alarm. Refer to "Maintenance & Cleaning" section.
2. Replace smoke alarm if problem persists.
1. Press the "Test" button to pause the alarm.
2. Clean smoke alarm. Refer to "Maintenance & Cleaning" section.
3. Move smoke alarm to new location if necessary and press the "Test" button.