アクセサリー DayStar Filters CALCIUM QUARKのPDF マニュアルをオンラインで閲覧またはダウンロードできます。DayStar Filters CALCIUM QUARK 17 ページ。

DAYSTAR FILTERS

Congratulations on your purchase of a Quark Calcium "Eyepiece" solar filter,

designed specifically for compatibility with F/7 or greater Refractor

telescopes. Please read this manual before using the product.

To use the filter, plug in the included power supply. Then insert the

Quark and insert an eyepiece or camera in the rear of the Quark. Turn

the knob to point straight away from the light. When the light turns

green in about 5-15 minutes your viewing experience can begin.

To prevent damage, we strongly recommend using a UV/IR cut filter over

80mm of aperture.

Warnings:

Do not disassemble the filter, the blocking element is separated from the

etalon and the complete assembly must be used together for safe viewing.

Do not power the filter from a computer or cell phone charger as the Quark

requires a high current power supply (> 1.5A) for operation.

For assistance:

Call:

1 (866) 680-6563

Visit:

http://www.daystarfilters.com

CALCIUM QUARK