- ページ 18

エリプティカル・トレーナー AFG 3.0 AEのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AFG 3.0 AE 20 ページ。
AFG 3.0 AE にも：ユーザーマニュアル (20 ページ)

ページを印刷する

1. Grounding Instructions

iiii_ _ _i

ARETHE SOUNDS M YELLIPTICAL MAKES NORMAL?

Our elliptlcals are some of the quietest available because they use belt drives and friction free magnetic

resistance. Weuse the highest grade bearings and belts to minimize noise. However, because the resistance

system itself is so quiet, you will occasionally hear other slight mechanical noises. Unlike older, louder

technologies, there are no fans, friction belts, or alternator noises to mask these sounds on our ellipticals.

Thesemechanical noises, which may or may not be intermittent, are normal and are caused by the transfer

of significant amounts of energy to a rapidly spinning flywheel Aft bearings, belts and other rotating parts

wifl generate some noise which wifl transmit through the casing and frame, It is also normal for these

sounds to change slightly during a workout and over time because of thermal expansion of the parts,

WHY IS THE ELLIPTICAL I HAD DELIVERED L OUDER THAN THEONE ATTHESTORE?

All fitness products seem quieter in a large store showroom because there is generally more background

noise than in your home, Also, there will be less reverberation on a carpeted concrete floor than on a wood

overlay floor, Sometimes a heavy rubber mat will help reduce reverberation through the floor, If a fitness

product is placed close to a wall, there will be more reflected noise,

HOW LONG WILLTHE DRIVE BELTLAST?

The computer modeling we have done indicated virtually thousands of maintenance free hours, Belts are

now commonly used in far more demanding applications such as motorcycle drives,

CANI MOVE THETRAINER E ASILY ONCE IT I$ ASSEMBLED?

Your elliptical has a pair of transport wheels built into the front legs. It is easy to move your elliptical by

rolling it on the front transport wheels, It is important that you place your elliptical in a comfortable and

inviting room, Your elliptical is designed to use minimal floor space, Many people will place their eflipticals

facing the TVor a picture window, If at aft possible, avoid putting your elliptical in a unfinished basement,

Tomake exercise a desirable daily activity for you, the elliptical should be in a comfortable setting,

CANI PEDAL BACKWARDS ONMYELLIPTICAL?

Your elliptical allows you to pedal both forward and backwards to exercise and strengthen a wider range

of muscles,

ii!_il

WHAT KIND OFROUTINE MAINTENANCE IS REQUIRED?

We use sealed bearings throughout our ellipticals

so lubrication

is not needed, The most important

maintenance steps are to wipe perspiration off the unit after each use and periodically checking the

assembly bolts for tightness,

HOW dO I CLEAN MYELLIPTICAL?

Clean with soap and water cleaners only, Never use solvents on plastic parts,

Cleanliness of your elliptical and its operating environment will keep maintenance problems

and service calls to a minimum, For this reason, AFG recommends that the following preventive

maintenance schedule be followed,

AFTER EACH USE(DAILY)

Turnoff the elliptical by unplugging the power cord from the wall outlet

• Wipe down the elliptical with a damp cloth, Never use solvents, as they can cause damage to the

elliptical

• Inspect the power cord, If the power cord is damaged, contactAFG,

• Make sure the power cord is not underneath the elliptical or in any other area where it can become

pinched or cut.

WEEKLY

Clean underneath the elliptical, following these steps:

• Turn off the elliptical

• Move the elliptical to a remote location,

• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the

elliptical

• Return the elliptical to its previous position,

EVERY MONTH

• Inspect all assembly bolts and pedals on the machine for proper tightness,

• Clean any debris off of the pedal arm wheels and guide rails,

iii_ i

3.04.0

Rev.l.6.indd

34-358/27/073:36:53