- ページ 12

エアーコンプレッサー Automated Processes, Inc. 529のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Automated Processes, Inc. 529 14 ページ。 Stereo compressor

Compressor Bypass (OUT)

The 529 is equipped with a relay-based, hard-wired bypass. Press-and-hold the OUT switch to toggle

the BYPass control. When the compressor is in BYPass (yellow BYP LED illuminated), the hard-wired

bypass is engaged.

In this state, the input audio signals are routed directly to the audio output

connectors and do not pass through the 529 electronics.

A momentary press of the OUT switch toggles the IN function. When the compressor is IN (green IN

LED illuminated), the compressor is active and behaves normally. When IN is disengaged (green IN

LED not illuminated), the control voltage signal is disengaged and the output signal is held at 0dB.

Audio continues to pass through the 529 electronics.

NOTE: When the 529 is powered off, it is held in the BYPass state. When the compressor is not in

the BYPass state (yellow BYP LED not illuminated), the 529 behaves normally.

The 529 Compressor is equipped with a 10-segment LED stereo VU meter and a 10-segment LED gain

reduction meter.

The 10-segment LED stereo VU meter can be fed from the compressor inputs or outputs.

The 10-segment LEFT and RIGHT LED VU meters have the following values:



5 2 9 S t e r e o C o m p r e s s o r

OUT (Compressor Bypass): Toggle to engage and disengage the hard-

wired bypass



BYPass: Engages the relay-based hard bypass (yellow LED)



IN: Engages the compressor signal path (green LED)

+18dBu

+9dBu

+6dBu

+3dBu

0dBu

-3dBu

-6dBu

-7dBu

-12dBu

-15dBu

METER: Toggle to select OUTPUT or INPUT as the source for the

stereo VU meters



OUTPUT: Routes the compressor output to the stereo VU

meters (yellow LED)



INPUT: Routes the compressor input to the stereo VU

meters (green LED)

A P I