- ページ 7
電動工具 Automatic DB 5801のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Automatic DB 5801 13 ページ。 250w multi tool
ページを印刷する5) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the safety
of the power tool is maintained.
Additional safety rules for multi tools
WARNING: Know your multi tool. Do not
plug the tool into the power source until you
have read and understand this Instruction
Manual. Learn the tool's applications and
limitations, as well as the specific potential
hazards related to this tool. Following this rule
will reduce the risk of electric shock, fire, or
serious injury.
Always wear eye protection. Any power tool can throw
foreign objects into your eyes and cause permanent eye
damage. ALWAYS wear safety goggles (not glasses) that
comply with ANSI safety standard Z87.1. Everyday glasses
have only impact resistant lenses. They ARE NOT safety
glasses.
WARNING: Glasses or goggles not in
compliance with ANSI Z87.1 could cause
serious injury when they break.
Always keep hands out of the path of the saw blade. Avoid
awkward hand positions where a sudden slip could cause
your hand to move into the path of the saw blade.
Secure workpiece. Use clamps or a vice to hold the
workpiece. It is safer than using your hand and it frees both
hands to operate the tool.
Make sure there are no nails or foreign objects in the part of
the workpiece to be cut or sanded.
To avoid injury from accidental starting, always remove the
plug from the power source before installing or removing an
accessory.
Never use dull blades in the tool. They will cut slower,
leave rough cuts and break easily due to added pressure
and excessive heat. They will also overload the motor and
cause premature failure of the tool.
Never use damaged or bent blades. They will be brittle and
break easily possibly causing injury to the operator.
Never touch a saw blade immediately after using the tool.
The blade will be extremely hot and will burn your hand.
Only use accessories designed for use with this tool.
WARNING: We recommend the use of a
residual current device with a residual current
rating of 30mA or less.
Wear goggles
Wear ear muffs
Wear a breathing mask
7