- ページ 7

水ポンプ HIBLOW hp-200のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。HIBLOW hp-200 17 ページ。 Air pumps
HIBLOW hp-200 にも：取扱説明書 (13 ページ), マニュアル (8 ページ)

(1) Prior to starting the work, be sure to unplug the pump.

(2) Remove all screws from the four corners, and the upper housing. If it is difﬁcult to remove it due

tothe heavily stuck internal seal packing, pry it open by inserting the tip of a screwdriver into the

clearance between the exhaust nozzle and the upper housing .

Fig. 3

Screwdriver

inserting

position

(3) Remove the sound absorber, hold the hose band and remove the L-tube from the casing nozzle.

Then, loosen the installation screws of the casing block for removal of the latter. (Figs. 5 and 6)

Fig. 5

Screw

Sound absorber

Fig. 4

Upper housing

Fig. 6

Hose band

L-tube

Screw

(Figs. 3 and 4)

Sound absorber

Casing Block