屋外ライト IGOO SmartlampのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。IGOO Smartlamp 4 ページ。

This operation instruction includes information on safety, operation supervision and warranty.

To avoid getting harmed, please read all the operation instructions and safety information

below before using IGOO.

IGOO smartlamp mainly includes a smartlamp body, a controller, a controller power adapter and

USB cable.

Smartlamp body input: 100-240V～50/60Hz 3.0A(Max) 100W

Smart control Adaptor input: 100-240V～50/60Hz 0.3A

After the laboratory measurement for the controller the Max SAR value is 0.738W/kg and meets

applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the

rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in countries

that set the limit averaged over 1 gram of tissue and 2.0 watts per kilogram in countries that set

the limit averaged over 10 grams of tissue. During testing, product radios are set to their highest

transmission levels and placed in positions that simulate use near the body, with 5mm

separation.

First connect the power plug of the smartlamp body with AC power (100V-240V), the smartlamp

body will start up automatically. Press the power button on the controller for 3 seconds, the

controller will start up. The controller will connect to the smartlamp body automatically, which

can be controlled by the controller after connection.

Important Safety and Operation Information

Warning: Failure to follow these safety instructions could result in fire, electric shock, or other

injuries or damages to IGOO or other properties.

The USB port is just used to charge and can't used to transmit data

Smartlamp Body Operation

Avoid to place the smartlamp into water or moist environment. IGOO smartlamp is used

indoors and without waterproof performance. Therefore, please don't place the body outdoors

or in the rain. There are electronic devices at the bottom of smartlamp body, so please don't

place it in water or moist environment. Please don't pour water in the mouth on the top of

smartlamp body.

Avoid covering the head. When smartlamp is in use, the head will normally generate heat.

Make sure it's well ventilated around the smartlamp body, and don't cover the smartlamp body

with things like clothes.

Place the smartlamp body at stable and level locations. Please place smartlamp body on

IGOO Smartlamp User Manual