- ページ 2

アウトドアカート Daytona 58865のPDF 取扱説明書と安全上のご注意をオンラインで閲覧またはダウンロードできます。Daytona 58865 4 ページ。

Daytona 58865 取扱説明書と安全上のご注意
Specifications
Maximum Weight Capacity
Overall Dimensions
IMPORTANT SAFETY INFORMATION
1. Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
2. Do not use Creeper when you are tired or
under the influence of alcohol or drugs.
3. Do not work under a vehicle raised on a jack.
Support vehicle on jack stands (not included).
Block any tires that will remain on the ground.
4. If the vehicle is on the ground, block the tires, set
the parking brake, and put it in gear or park.
5. This product is not a toy. Do not allow
children to play with or near this item.
6. Use as intended only. Do not stand on creeper.
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY:
Do not work under a vehicle raised on a jack. Support vehicle on jack stands (not
included). Block any tires that will remain on the ground. If the vehicle is on the
ground, block the tires, set the parking brake, and put it in gear or Park.
1. Lay Headrest (1) flat by pulling it toward pad (2)
until it locks on third postion. Headrest drops flat
after pulling it towards pad on third position.
a. To adjust the Headrest, pull up to lock on
first position. Continue to pull toward pad to
lock headrest in second and third position.
Page 2
350 lb
39 - 5/8" L x 17 - 1/2" W x 4- 1/2" H
For technical questions, please call 1-888-866-5797.
7. Store on edge, clear of walkways when not in use.
8. Inspect before every use; do not use
if parts are loose or damaged.
9. Do not exceed maximum weight capacity.
Be aware of dynamic loading! Suddenly
dropping onto creeper may briefly create
excess load causing product failure.
10. Use on flat, level, hard surface only.
11. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
2. Keep your head flat on the Headrest while
sliding under the vehicle. Then, pull the
Headrest and lock it in a comfortable angle.
3. Pull headrest toward pad on third position to
lay flat and slide Creeper out under vehicle.
58865