- ページ 5
ラック＆スタンド Daytona 57745のPDF 取扱説明書と安全上のご注意をオンラインで閲覧またはダウンロードできます。Daytona 57745 8 ページ。 Gear driven rotating engine stand
ページを印刷するMaintenance and Servicing
Procedures not specifically explained in this manual
must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM STAND FAILURE:
Do not use damaged equipment. Make sure the stand is stable. If any unsafe conditions
are found, take it to a qualified technician for service or repair.
1.
BEFORE EACH USE, inspect the general condition of
the Stand. Check it for cracks, bends in the metal, signs
of unusual wear or any other condition that may affect its
safe operation. If any are found, do not use the Stand.
2.
Keep Engine Stand clean and free of dirt or grease.
Folding the Stand for Storage
WARNING! TO PREVENT SERIOUS INJURY: Do not use
the Stand while it is folded. This is only for compact storage.
1.
Remove R-Pins (14).
2.
Remove Leg Lock Pins (13).
3.
Lift Leg into vertical position. See Figure G.
3
Figure G: Raising Legs
Item 57745
1
2
For technical questions, please call 1-888-866-5797.
3.
Before each use, check that hardware is securely fastened.
4.
Check that the Casters are clean and turn properly.
AFTER USE, clean external surfaces of
5.
the stand with a clean, moist cloth.
4.
Insert Leg Lock Pins (13) through the upper hole
in the Base so that it holds the Leg in place. Lock
in place with R-Pins (14). See Figure H.
Figure H: Securing Raised Legs
3
4
Page 5