- ページ 10
フライヤー Emeril Lagasse DZEL24 SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Emeril Lagasse DZEL24 Series 20 ページ。
ページを印刷する
Parts & Accessories
Using the Rotisserie Set
1.
If the Divider is inside the appliance, remove the Divider.
Do not use the Divider when using the Rotisserie Set.
2.
Carefully slide the Rotisserie Shaft through the center of
the food lengthwise.
3.
Slide the Forks onto each side of the Spit and secure
them in place by tightening the two Set Screws. To
support the food on the Rotisserie Spit better, insert
the Rotisserie Forks into the food at different angles
(see Fig. E).
4.
Hold the assembled Rotisserie Spit at a slight angle with
the left side higher than the right side and insert the right
side of the Spit into the Rotisserie connection inside the
appliance (see Fig. F).
5.
With the right side securely in place, lower the left side of
the Spit into the Rotisserie connection on the left side of
the appliance (see Fig. G).
Removing the Rotisserie Spit
1.
Use the Rotisserie Fetch Tool to hook the bottom of the
left and right sides of the Rotisserie Spit (see Fig. H).
2.
Pull the Rotisserie Spit away from the left rotisserie
connection point and then lift the Spit upward to remove
and disconnect the Spit from both connection points.
3.
Carefully pull the Rotisserie Spit out of the appliance.
Fig. G
10
Fig. E
Fig. F
Fig. H