- ページ 5
キッチン家電 Emeril Lagasse Blender & Beyond HB2248SのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Emeril Lagasse Blender & Beyond HB2248S 12 ページ。
ページを印刷する
Instructions for Use
Before First Use
1. Read all material, warning stickers,
and labels.
2. Unpack all listed contents from the
packaging. Please make sure that
your appliance has been shipped with
the components that you ordered.
Some accessories listed may be sold
separately. Check everything carefully
before use. If any part is missing or
Charging the Appliance
1. The appliance can be charged either by
loading it into the Charging Base or
by plugging a USB-C charger into
the appliance.
2. When charging the appliance, the
Indicator Lights show the appliance's
power level:
a) Three Indicator Lights: 100% power.
b) Two Indicator Lights: 75% power.
c) One Indicator Light: 40% power.
d) When the last Indicator Light is
flashing, the battery power is less than
30% and should be recharged soon.
8
Emeril Lagasse
Blender & Beyond
™
™
damaged, do not use this product.
Contact HPC Brands, LLC using the
customer service number located on the
back of this manual.
3. Remove all packing materials, stickers,
and labels from the appliance. Remove
any clear or blue protective film on
the components before use. Wash the
components with soap and water.
Instructions for Use
General Use
Make sure the appliance is fully charged
prior to use.
To start the appliance, first press the
Unlock Button. The Indicator Lights will
turn red. Then, press and hold the Power
Button. The Indicator Lights will turn
blue. If you release the Power Button, the
appliance will stop operating but remain
ready to use for 10 seconds. While the
Indicator Lights are blue, you can release
and press the Power Button as needed,
such as to pulse. After 10 seconds, the
Indicator Lights will turn off. In this state,
you will need to press the Unlock Button
again before pressing the Power Button
to continue using the appliance.
Use the Variable Speed Controller to
set the speed of the appliance. Set
the Variable Speed Controller to a low
speed before starting the appliance.
Once the appliance is running, adjust
the speed as needed.
NOTE: During use, it is normal for suction
to increase at the bottom of the container.
Adjusting the Appliance's Orientation
The appliance can be angled to make
different activities easier. To adjust the
orientation of the appliance:
1. Press the Angle Adjustment Button.
2. Rotate the bottom half of the appliance
until the appliance clicks into place in
the desired orientation.
3. The appliance can be rotated to
three different angles:
180°: Ideal for immersion blending.
135°: Ideal for whisk blending.
90°: Ideal for beating.
When blending is complete, release
the Power Button before removing the
appliance from the mixture.
The recommended time of use for the
appliance is 1 minute of continuous use.
Indicator Lights
When you press the Unlock Button, one
Indicator Light will turn red. When you press
the Power Button within 10 seconds, the
Indicator Lights will turn blue. The number
of lights displayed indicates the appliance's
battery charge (see the "Charging the
Appliance" section).
Operating Tips
Cut solid foods into ½-inch (13 mm)
pieces for easier mixing or chopping.
Use an up and down motion for blending
and pureeing.
If using the blender directly in a saucepan,
be sure to remove the pan from the heat
before using the blender.
ANGLE ADJUSTMENT BUTTON
9
Emeril Lagasse
Blender & Beyond
™
™