- ページ 10

アンプ DaytonAudio HTA200BTのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DaytonAudio HTA200BT 12 ページ。 200w integrated stereo hybrid tube amplifier

Specifications

Maximum Power Output (Peak) ................. 260W x 2 @ 4 Ohm, 130W x 2 @ 8 Ohm

RMS Power Output ..................................... 100W x 2 @ 4 Ohm, 80W x 2 @ 8 Ohm

Total Gain .................................................... 29 dB

THD+N ......................................................... <1.5% @ Maximum Rated Output

Frequency Response ................................. 15 Hz – 20,000 Hz (1 dB)

Input Sensitivity .......................................... 630 mV

Channel Separation .................................... 53 dB

Minimum Speaker Impedance ................... 4 Ohm

Tone Controls – Bass/Treble ..................... 6 dB/oct @ 200 Hz and 4,000 Hz

Signal To Noise Ratio ................................. 80 dB

Digital Section

Digital Inputs ............................................... SPDIF LPCM (up to 48 kHz 16 Bit)

PC-USB ........................................................ up to 192 kHz 32 Bit

Bluetooth ..................................................... 5.0

General

Power Requirement

USA.................................................... 110V, 60 Hz

EC ...................................................... 220V, 50 Hz

Idle Power Consumption ........................... 45W

Preamplifier Tubes ..................................... 13P1P x 2, 6H2 x 2, 6A2 x 2

Stabilivolt Tube ........................................... WY3P

Amplification ............................................... Class A/B

Dimensions (W, H, D) ................................. 13-1/8 x 6-1/2 x 12-1/2 in. (333 x 165 x 318 mm)

Weight .......................................................... 16.4 lbs. / 7.44 kg

All specifications are accurate at the time of printing.

Dayton Audio reserves the right to make improvements without notice.

Dayton Audio products are warranted to be free of all defects in material and workmanship for 5 YEARS from the

date of purchase from an authorized Dayton Audio dealer. This warranty and all rights provided are limited to the

original owner and are non-transferable. Responsibility is limited to replacement or repair as set forth in this warranty

statement.

Should a product require warranty service during this period, Dayton Audio will repair or replace without charge, any

part or product proving defective in material or workmanship. All warranty repairs and service must be performed by

an authorized Dayton Audio technician or service facility. The use of non-authorized repair services renders this war-

ranty null and void, and any charges relating to non-authorized repair are the responsibility of the product owner.

All expenses (except return shipping costs) related to replacing or repairing a defective part or product under this

warranty shall be assumed by Dayton Audio. Dayton Audio reserves the right to replace defective product with a new

or factory reconditioned unit.

For more information and to register your new Dayton Audio device visit daytonaudio.com.