- ページ 5
体重計 Greater Goods 0376のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Greater Goods 0376 14 ページ。 Body fat analyzer
ページを印刷する
Initial Start-Up
General Instructions
Greater Goods,LLC Body Fat Analyzer 0375,0376 applies BIA (Bio-impedance Analysis)
technology. A small amount of weak current flows through the human body so as to detect
the bio-impedance and estimate BMI, body fat, body water, muscle mass and bone mass.
The electrical current is small and may not be felt.
This BIA technology is cheap, safe, non-invasive, toxic-free and harmless. It also
possesses the characteristics of simple operation and abundant information.
The current mentioned above is less than 0.5mA. However, please be aware that anyone
with an wearable or implantable medical electronic instrument, such as a pacemaker, must
avoid using this device.
The intended use of this device is for healthy children 10-17 years old and healthy adults.
Power Supply
Battery Mode: 6V, 4 x AAA batteries
Battery Life: Approx. 120 days
(Battery capacity: 230 mAH. If measured three times per day, each measurement takes about 46s.
The current for measurement is about 30 mA , while the current when shutdown is about 30 uA.)
Insert the Batteries
Open the battery door in the back of the scale.
Insert the batteries (4 x 1.5V AAA) into the battery
compartment according to the polarity indications
marked inside the compartment.
* The digits "
" will be shown on the LCD.
Close the battery door and wait until the digits "
are shown on the LCD.
CAUTION
When the symbol
appears, the device will power off. Then you shall replace with a new set of
batteries. Please replace all four batteries at the same time. Do NOT mix the old batteries with the new
one.
Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage.
Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries
and scrapped device.
If you do not intend to use this unit for a prolonged period of time, it is advisable to remove the batteries
before storing.
6
"
Pair-Up
With the advanced Bluetooth 4.0 technology applied, the mobile or portable equipments,
which are equipped with Bluetooth function in line with BLE Technical Specifications
established by global organization Bluetooth SIG, are capable to receive your personal
health data.
Turn on Bluetooth and the App. Make sure both are ON when pair-up is proceeding.
Press and hold "UNIT" button in the back of the scale to start pair-up.
Symbol
and symbol
will be shown on the
LCD alternatively, indicating pair-up is proceeding.
If SUCCEED, symbol
will be shown on the LCD.
If FAIL, symbol "E1" will be shown on the LCD.
Initial Start-Up
7