- ページ 2

スピーカー DaytonAudio B652のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DaytonAudio B652 4 ページ。 6-1/2" 2-way bookshelf speaker pair
DaytonAudio B652 にも：ユーザーマニュアル (2 ページ), ユーザーマニュアル (2 ページ)

ページを印刷する

Thank you for choosing Dayton Audio

to provide exceptional performance and maximum value. Please read on to

discover how to get the most from your new speakers.

Front without grill

CONNECTING YOUR LOUDSPEAKERS

Use good quality wire for the connection between your Dayton Audio

loudspeakers and the ampliﬁer. For distances up to 10 feet, conventional "speaker

wire" or lamp cord is acceptable. For longer runs, heavier wire should be used.

For proper performance the speakers must have correct polarity. To insure proper

polarity, connect the red speaker terminals to the red ampliﬁer terminals and the

black speaker terminals to the black ampliﬁer terminals. All two-conductor wire is

marked in some way to help you do this. One side will be marked with a colored

stripe, a raised rib, or a different colored conductor. Use the marked side for the

"red" connections.

ROOM PLACEMENT

Because of their well-behaved off-axis response and excellent dispersion, your

new Dayton Audio speakers are less critical to position than most loudspeakers.

Often, simply placing them where they best ﬁt into the decorating scheme is all

that is necessary for exceptional performance.

If you are inclined to go through a more rigorous positioning exercise, the

following paragraphs will help you achieve all the performance that your system is

capable of.

Carefully select a few recordings. Choose recordings made with simple

miking and strong vocals by a single performer. Avoid recordings with piano

accompaniment unless you know that the recording microphones were at least 15-

20 feet from the piano. The reason for this precaution is that the piano is a large

instrument, and is often recorded with multiple microphones placed close to it.

The notes arrive at the microphones from different directions and the speakers will

reproduce the directional clues confusing the positioning process. Physically small

sound sources localize much more precisely. Horns, strings, vocals, and drums

snap into place with the loudspeakers are optimally positioned.

. Dayton Audio loudspeakers are designed

Side

Back

Front