- ページ 4

ゲートオープナー Automatic Solutions KING 24VのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Automatic Solutions KING 24V 14 ページ。 Con / avec / with / mit t2 24v leaf gates

ページを印刷する

ECHANICAL STOPPER ADJUSTMENT

To adjust the stoppers you have to follow the scheme (Fig. 9).

To set the opening limit it's enough to fix the stopper (A) in the needed

position by tightening the 8mA screw with a n. 13 key.

To obtain the desired closing limit you must adjust the stopper (B)

(OPTIONAL) ) in the needed position and tighten it as for stopper (A).

MERGENCY RELEASE

To move the gate manually it is necessary to release the operator

inserting the special key and turning it 2 times in the anti-clockwise

sense (Fig. 11).

In order to carry out the manual operation of the gate leaf the followings

must be checked:

- That the gate is endowed with appropriate handles;

- That these appropriate handles are placed so to avoid safety risks for

the operator;

- That the physical effort necessary to move the gate leaf should not be

higher than 225 N, for doors/gates for private dwellings, and, 390N for

doors/gates for commercial and industrial sites ( values indicated in

5.3.5 of the EN 12453 norm).

AINTENANCE

To be undertaken only by specialized staff after disconnecting power

supply.

Lubricate the hinges and check the oil level and thrust force generated

by the operator on the gate once a year.

Lubricate the nut screw with silicon grease every two years.

COL

Column attachment

KING 24V

ANT

Leaf attachment

KING 24V

ANT KING 24V L

Leaf attachment

KING 24V L