ページを印刷する
- 1. Table of Contents
- 2. Package Contents
- 3. Product Overview
- 4. Assembly
- 5. Charging
- 6. Riding Basics
- 7. Riding Notice
- 8. Dangerous Actions (no Attempting!)
- 9. Safety Instructions
- 10. Folding and Carrying
- 11. Daily Care and Maintenance
- 12. Disc Brake Adjustment
- 13. Specifications
- 14. Limited Warranty Statement
To remove the disc brake noise,
First make sure the scooter is turned off. For easier operating, we suggest you put the scooter on the desk.
Loosen two screws on the pump (not the screw on the rocker).
Adjust the position of the disc brake pump to ensure that the brake disc is in the middle of the two
brake pads.
Keep the brake disc and brake pad not touching each other.
Hold the disk brake pump in the desired position, then retighten the screws to the pump.
18
12. Specifications
Max3
Load
Max. Range
Operating Temperature
(1) The height of the body: distance from the ground to the highest end of the body.
(2) Description of the battery life: it is measured under the condition of full charge, a load of 150 lb, at 77°F , on a flat road without wind, and at
a speed of 9.3mph. The real battery life will differ with different factors of the load, humidity, wind speed and operation habits.
(3) The maximum allowable weight shall be kept within 220lb (driver and objects included)in any case. Consider an extra weight of the clothes or other accessories
with us during the trip and the gravity generated by speed, the scooter will not support it if this load limit is exceeded.
45.1*19.5*43.5 inch
45.1*19.5*18.3 inch
40 lbs
220 lbs
16-50
18.6 mph
12 - 17 mile
15%
32-104 ℉
IPX4
36 V
42 V
7.5 AH
350 W
100-240 V
42 V
2 A
≌4 h
19