- ページ 9

電話 GAI-Tronics KETS 1141のPDF インストールとユーザーマニュアルをオンラインで閲覧またはダウンロードできます。GAI-Tronics KETS 1141 20 ページ。 Titan illuminated crossing telephone

1. Remove the RED blanking plug leaving the other (usually BLACK) in

place.

2. Select the appropriate sized gland:

Use the smaller gland for cables diameters 4 - 7mm.

Use the larger gland for cable diameters 8 - 13mm.

3. From the outside of the case, insert

the selected gland into the threaded

cable entry hole and tighten, so that its

sealing washer is compressed against

the enclosure surface.

4. Proceed with chosen mounting method

below

As standard, the telephone is supplied with a pole mounting kit, part number

100-02-0208-001.

6.3. Wall mounting

1. Using a suitable tool, punch out 4 holes in the rear enclosure, taking

care not to damage or dislodge the plastic bushes. Only four of the

eight holes are required - the outer ones are recommended. The

inner holes are provided to be compatible with older-style mounting

posts, and should be left intact if not used. If the inner holes are

used they must be fitted with the supplied plastic bushes.

KETS 1141 Titan Illuminated Crossing Telephone