- ページ 4

室内暖炉 ActiveFlame EF10123 GYのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ActiveFlame EF10123 GY 13 ページ。

Installation- Wall Mount
1
Wall location preparation
□ Select the wall location where you want to hang your
fireplace.
□ Draw a horizontal line using a level (Figure F)
□ Using the mounting bracket as a guide, mark 4 drill holes
for the 4 anchors (for drywall) or 4 screws (for wood studs).
NOTE: The holes are for mounting the fireplace. Insure
the horizontal line is level so the heater can be mounted
properly.
NOTE: Please maintain at least 36 inches between the air
outlet on the fireplace and the ceiling.
REMARQUE : Le foyer n'aura pas de fonctions de chauffage
disponibles si l'interrupteur DEMO est activé. Reportez-vous
à Fonctionnement - 4 pour plus de détails.
2
Pre-drill screw
□ Drill 4 holes 8 mm (5/16in) in diameter and 43 mm (1.7in)
deep on the marked locations.
□ For holes that do not hit a stud, use the supplied wall
anchor. Install the wall anchors into the holes and gently
tap them into place with a hammer until the flange of the
wall anchor is flush with the wall surface. See Figure G.
________
B X 4
(or as required)
Anchor/Screw locations
Figure F
Figure G
4