- ページ 13

電動工具 Greatneck 80160のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Greatneck 80160 20 ページ。 Variable speed jigsaw

WARNING:

your jigsaw from the power source

when replacing blades, tilting the sole

plate, cleaning or when the tool is not in

use. Disconnecting the jigsaw will

prevent accidental starting that could

cause serious personal injury.

INSTALLING BLADES (not included)

Unplug your jigsaw from the power

source.

WARNING:

jigsaw from the power source could

result in accidental starting causing

serious injury.

Insert the hex key (1) through the

access hole in the chip shield (2)

(Fig. 1).

NOTE: Use the 3 mm hex key

supplied to loosen screws.

Loosen both blade clamp screws (3)

and insert the saw blade (4) as far as

possible into the slot in the blade

clamp.

NOTES:

a) Ensure the blade is nested in the

groove in the support roller (5).

b) The holes in universal fitting saw

blades are not designed for alignment

with the screw holes in the blade

clamp.

Tighten both blade clamp screws (3)

securely against the blade.

ASSEMBLY & OPERATION

Always disconnect

Failure to unplug your

To remove the jigsaw blade:

Unplug your jigsaw.

Loosen blade clamp screws (3) using

the 3 mm hex key.

Remove the blade.

To turn your jigsaw ON, depress the trigger

switch (1) (Fig. 2). To turn the saw OFF,

release the trigger switch.

Fig. 1

Fig. 2