- ページ 10

ガレージドアオープナー Automatic Technology GDO-8 Shed MasterのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Automatic Technology GDO-8 Shed Master 20 ページ。 Weather resistant roll up door opener
Automatic Technology GDO-8 Shed Master にも：インストレーション・インストラクション (2 ページ)

ページを印刷する

GDO-8 ShedMaster

8. Coding Transmitters

8.1 Setting the Transmitter Operate the Door

The opener can only operate from transmitters that have

been programmed into its receiver. The receiver needs

to learn the codes of any transmitter that will be used

with the operator.

a. Ensure the opener is turned on.

b. Press and hold the DOOR CODE button. The DOOR

CODE LED will illuminate and beep to indicate the

opener is in Code Learn mode.

c. Press and hold the transmitter button that you want

to control the door for two (2) seconds, pause for two

(2) seconds, then press the same button again for two

(2) seconds and release.

d. Release the DOOR CODE button.

e. The transmitter is now coded to operate the

door - press the button to test.

8.2 Setting the Transmitter to Operate

Vacation Mode

The opener can be programmed into a "Vacation

Mode" where the opener will not respond to any

transmitter except one preprogrammed unit.

a. Briefly press the DOOR CODE button once, then

press it again and hold (will beep two times on

second press

(Fig.

b. Press one of the four (4) buttons on the transmitter

for two (2) seconds, pause for two (2) seconds, then

press the same button again for two (2) seconds.

c. Release DOOR CODE button.

d. Press and hold the transmitter button for six (6)

seconds to activate Vacation Mode. The door code

LED will stay lit while Vacation Mode is active.

e. To deactivate Vacation Mode, press the same

transmitter button for two seconds.

Home Owner's Manual

(Fig.

8.1).

8.2).

IMPORTANT NOTE: Only TrioCode

Technology Transmitters are compatible

with this GDO-8V3 product.

Press and hold the

DOOR CODE button

Fig. 8.1

Press DOOR

CODE button

twice.

Fig. 8.2

128

Select one of the

four buttons on key

transmitter you wish

to use to control the

door.

Select one of the

four buttons (not

programmed yet )

you wish to use to

control the Vacation

Mode