- ページ 4

ガレージドアオープナー Automatic Technology GDO-8 Shed MasterのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Automatic Technology GDO-8 Shed Master 20 ページ。 Weather resistant roll up door opener
Automatic Technology GDO-8 Shed Master にも：インストレーション・インストラクション (2 ページ)

ページを印刷する

GDO-8 ShedMaster

2. Features

Warranty

Two (2) year/5,000 cycles full parts and labour

warranty on motor, electronics and mechanical

components of the opener when installed by an

Automatic Technology Dealer.

TrioCode

128 Technology

Only

transmitters

Technology can operate with the latest Openers,

reducing the chance of interference from other radio

frequency sources. TrioCode

have the ability to code into earlier model openers.

Code Hopping Technology

Every time a transmitter is used a new security code

is generated from over 100 billion possible code

combinations. This greatly enhances the security of

the system and makes "code grabbing" a thing of

the past!

Multi-Channel Transmitter

Multi-channel transmitters allow you to operate

other devices such as an adjoining garage door or

automated gate from the same handy unit.

Weatherproof Design

The opener's control board is housed in a

weather-proof enclosure rated to IP24. This

offers protection from rain and the elements.

NOTE: the unit should not be sprayed by a hose or

any other water carrying device.

S-ALPS (Semi Automatic Limits Positioning

System)

The S-ALPS system does away with manual

adjustment of the door's limits position using

mechanical parts, such as cams and microswitches.

During installation the handheld transmitter can be

programmed to set the limits positions.

Overload Indicator

When the maximum opening and closing capacity

of the opener is exceeded an audible beeper will

sound to indicate that an overload has occurred.

ISS (Intelligent Safety Obstruction System)

While the door is performing a close cycle, should

it hit an obstacle or be restricted in some manner, it

Home Owner's Manual

with

the

TrioCode

128 transmitters

will automatically reverse. The amount of force

the door should encounter before reversing

is automatically adjusted by the doors control

system during the initialisation of the automatic

door opener.

Lockable Control Panel

128

The control panel can be locked and disabled

to prevent tampering. This is useful if the

opener is to be mounted on an exposed carport

or a perimeter door. Locking the control panel

will prevent operating the door via the Operate

button, re-profiling the door, clearing limits,

clearing transmitters, changing force margins,

and coding transmitters.

Safety Beam (optional)

The opener has an input for a Safety beam to

be connected for extra safety protection.

Manual Operation

The opener is equipped with a unique patented

manual disengaging device. If the power to the

opener is disrupted for any reason, the door

can be put into manual mode by pulling down

on the string handle, then releasing. This will

allow you to manually open or close the door.

Security Lock For Manual Release

Handle (optional)

For added security the manual release handle

can be locked out or disabled. This is ideal if the

opener is to be mounted on a perimeter door in

an exposed carport.

Vacation Mode

A transmitter can be programmed to disable

the garage door opener radio receiver. This is

ideal if the door is to be left idle for prolonged

periods. (Refer to 8.2 for information)