- ページ 2

スピーカー GAI-Tronics 13354-001のPDF マニュアルをオンラインで閲覧またはダウンロードできます。GAI-Tronics 13354-001 4 ページ。 Wall-mount speaker for 6-channel radio

Model 13354-001 Wall-Mount Speaker for 6-Channel Radio

Mounting

There are four 0.280-inch mounting holes located in the four corners of the rear enclosure for mounting

the speaker. Refer to Figure 2.

1. To access these mounting holes, loosen the six captive screws on the front of the enclosure.

2. Gently pull the front enclosure of the speaker away from the rear enclosure.

3. Disconnect the white and yellow quick-connect receptacles from the terminal block in the rear

enclosure.

4. Mount the rear enclosure to the desired surface using the mounting holes shown in Figure 2.

5. Reconnect the white quick-connect receptacle to the terminal block terminals in the rear enclosure

per the terminal block label (com – white). Reconnect the yellow quick-connect receptacle to the

8-ohm on the terminal block terminals in the rear enclosure.

6. Align the front enclosure with the rear enclosure of the speaker. Tighten the front enclosure screws

to 16–20 in-lbs. torque.

f:\standard ioms - current release\42004 instr. manuals\42004-446a.doc

4/11

Figure 2. Mounting Hole Details

Pub. 42004-446A

2 of 3

Page: