- ページ 5

緊急電話 GAI-Tronics 234WM-202のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。GAI-Tronics 234WM-202 13 ページ。 Wall-mount stanchion assembly

Model 234WM-202 Wall-Mount Stanchion Assembly

Tempered Glass Installation (Factory Installed)

1. Remove the keps nuts, spacer brackets, and holding brackets. These parts will be used for holding the
glass in place.
2. Carefully unpack the glass from the box located in the telephone mounting area of the Model
234WM-202 Wall-Mount Stanchion.
3. Center the front glass left to right and top to bottom around the opening in the front panel assembly
and fasten in place using the spacer brackets, holding brackets, and keps nuts removed previously.
Refer to Figure 4 for assembly details.
: Do not exceed 24 inch-pounds of torque on the keps nuts.
N
OTE
4. Repeat the above steps for both side glass pieces.
p:\standard ioms - current release\42004 instr. manuals\42004-308g.docx
04/16
Figure 4. Glass Installation Instructions
Pub. 42004-308G
Page 5 of 11