- ページ 7

インターホン・システム GAI-Tronics DEX-102のPDF マニュアルをオンラインで閲覧またはダウンロードできます。GAI-Tronics DEX-102 14 ページ。 Hazardous area driller’s intercom stations

ページを印刷する
M
DEX-10
DEX-20
ODEL
X AND

Field Wire Installation

Remove the termination enclosure cover and pull all wiring into the termination enclosure. Make all
connections as described below.
: All field wiring is to be completed in the termination enclosure (bottom enclosure) only.
N
OTE
Figure 4. DC Model Installation Diagram (See note below.)
Figure 5. AC Model Installation Diagram (See note below.)
: Consult the National Electrical Code (NFPA 70), Canadian Standards Association (CSA 22.1),
N
OTE
and local codes for the specific requirements regarding your installation. Install all equipment without
modification and according to the local and national codes. Install conduit and seals where required.
Class 2 circuit wiring must be performed in accordance with NEC 725.55.
f:\standard ioms - current release\42004 instr. manuals\42004-679l2d.doc
10/10
D
'
I
S
X
RILLER
S
NTERCOM
TATIONS
Pub.: 42004-679L2D
Page 6 of 13