- ページ 8

体重計 Dynalab DGRM-01-02のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dynalab DGRM-01-02 8 ページ。 Rockers - dgrl, dgrm, dsrl & dsrm series

There are two knobs and one main switch on the front panel of the analog types of the

mixers. The main switch has three stages function: ON, OFF and Timer. For continuous

operation, place the switch to the "ON" position, and turn the rpm knob (on the right hand

side) to desired speed. When using timer, place the switch to "Timer" position, and adjust

the speed using speed knob. Before turning on the machine, please turn the speed knob all

the way to the left hand side (minimum level)! And adjust the speed gradually.

3. The temperature setting of the mixer incubator (*MI series)

The mixer incubators have two separate control panels: The bottom panel is for the control

of speed and timing which is exactly the same setting procedures describe above; and the

top control panel is for temperature control (see Figure 16). To set the temperature, hold

the set button, and turn the knob to the desired temperature. After release the set button,

the temperature setting takes in effect immediately. For CMI-100, the temperature can only

be set from 5˚C above room temperature to 60 ˚C maximum.

Maintenance and Service

This range of equipment only requires routine cleaning for the maintenance. Before

cleaning, Always unplug the equipment from the electrical outlet. Use soft cloth with mild

detergent to clean the surface of the equipment.

Dynalab Corp. | 175 Humboldt Street, Suite 300 | Rochester, NY 14610

Tel: 800-334-7585 | Fax: 585-334-0241

www.dynalon.com

| E: