- ページ 2

エンクロージャー GAI-Tronics XB001のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。GAI-Tronics XB001 5 ページ。 Weatherproof long-life battery enclosure

Model XB001 Weatherproof Long-Life Battery Enclosure

Installation

1. Remove the four screws from the front of the enclosure. Open the front cover to the left and pull

straight out until the hinge pins separate from the rear section. Set the front door of the enclosure

aside.

2. Secure the rear section of the external battery enclosure to the desired surface with screws or

appropriate customer-provided fasteners. Each enclosure mounting hole is 0.280 inch in diameter

allowing the use of 1/4-inch diameter screws. Refer to Figure 1. The enclosure can also be mounted

to a Model 230 Pole Mounting Kit for pole or surface mounting. Four mounting screws are provided

with the pole mounting kit.

\\s_eng\gtcproddocs\radio products-current release\43004\43004-033a\43004-033a.doc

08/08

Figure 1. Rear half of the enclosure

Pub. 43004-033A

Page: 2 of 5