ページを印刷する
_____________________________________________________________________________________________________
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690
Web page, E-mail - www.hidcorp.com - Miniprox Installation Manual 5365-910 Rev 1
3
Card Present
Testing and Operation
• When power is applied to the reader the LED will
flash green three (3) times while the beeper beeps
simultaneously. The LED will then turn red. This
indicates
that
the microcontroller
properly.
• Present an ID card to the reader. The LED will
momentarily turn green while the beeper beeps once,
indicating that the card was read successfully.
Important Product Specifications
Power requirements (linear supply)
Operating Voltage Range
Absolute Maximum Voltage
Peak Current
Average Current 5V or 12V
Maximum cable distance
To host
FCC Compliance Statement: This device complies with
part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept
any interference received, including interference that
may cause undesired operation.
Hold
Hold
Blue
TB1-9
---
Violet
TB1-10
is
operating
5.0 – 16.0 VDC
18 VDC
80 Ma
20 Ma
500 ft (153 m)