- ページ 10
変圧器 AUTOMATION 2000 DGPT2 SeriesのPDF テクニカル・インストラクションをオンラインで閲覧またはダウンロードできます。AUTOMATION 2000 DGPT2 Series 17 ページ。
ページを印刷する
A U T O M A T I O N 2 0 0 0
6– TECHNICAL DATA
6.1 Metal housing
Housing and cover in AISI 304 with 2 screws that can be sealed by lead
-
Ratings: IP56, IK07
- Wiring output through M25 cable gland with anchor (two positions possible)
Tighten capacity: 13-18 mm
- Wiring through terminal block with a 6 pitch
Tighten capacity: 4 mm² (12 or 18 terminals)
- 5 mm diameter earthing screw inside the housing
- 6 mm diameter earthing screw at the outside base of the housing
- Insulation: 500 VDC, 20 MΩ between terminals and earth
- Dielectric rigidity: 2,000 VAC, 1 minute between terminals and earth
- Fire hazard: the stuffing glands, terminal blocks, wires, etc. are made of
self-extinguishing halogen free material. The housing contains fire.
6.2 Plastic body
- Plastic body in polyamide with ultraviolet stabilizer
Ratings: IP56, IK07
- Gas volume graduations in cm
(10-160 cm
)
3
3
6.3 Reed contact
- 1 Reed contact (2 Reed contacts as an option)
- Change-over contacts
- Measure accuracy: ±5 cm
3
6.4 Pressure switch
-
Metallic
bellows
with
adjustable
counterspring
pressure
switch
with
1 microcontact (2 microcontacts as an option)
- Change-over contacts
- Adjustable set-point that can be sealed by lead
- Setting scale: 0–500 mbar (0-700 mbar on request)
- Setting accuracy: ±10 mbar
- Measure accuracy: ±5 mbar
- Response time: < 5 milliseconds
6.5 Thermostats
- 2 adjustable independent fluid expansion thermostats
- Ambient temperature compensation
- Change-over contacts
- Setting scale: 40–140°C
- Setting accuracy: ±2.5°C
- Measure accuracy: ±3°C at 60°C, ±1.5°C at 90°C
TECH. INSTRUCTIONS
Page
Rev.
N° T/NOT-0021
Date: 28/09/16
7
DGPT2
10
®