- ページ 3

カードリーダー HID OMNIKEY 5121のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。HID OMNIKEY 5121 4 ページ。
HID OMNIKEY 5121 にも：ユーザーマニュアル (2 ページ)

ページを印刷する

Installation Guide

Specifications and Installation

For further information, contact HID support:

For driver setup, consult the OMNIKEY Smart Card User Guide

(http://www.hidglobal.com/documents/ok3121_userguide_ins_en.pdf).

CAUTION: Install the drivers prior to attaching the OMNIKEY reader with the computer.

USB Connected Reader Specifications

Operating Temperature

PC Connector Cable

Meantime between Failure (MTBF)

Host Interface

Host Data Transmission Speed

Power Supply

USB Connected Reader Installation

1. Connect the reader with your computer; plug the USB connector into your

computers USB port.

2. When the reader is operational, the LED illuminates.

3. For contactless operation, hold the card next to the reader logo. For contact

smart cards, insert the card into the reader with contacts facing up.

4. When the reader is exchanging data with a card (reading/writing), the LED blinks.

PCMCIA and ExpressCard Reader Specifications

Operating Temperature

Meantime between Failure (MTBF)

Host Interface

Host Data Transmission Speed

Power Supply

PCMCIA and ExpressCard Reader Installation

1. Insert the reader into the compatible interface slot of your Notebook or mobile

device.

2. If the reader is operational, observe the reader in your operating system's Device

Manager.

3. For contactless operation, hold the card next to the logo on the reader. For

contact smart cards, insert the card into the reader with contacts facing up.

OMNIKEY

Smart Card Reader

http://support.hidglobal.com/

0°-55°C / 32°-131°F

180 cm / 70.9 in

(150 cm / 59,1 in - Models 1021 & 3021)

500,000 Hours

USB 2.0 CCID (USB 1.1 Compatible)

12 Mbps (USB 2.0 Full Speed)

Bus Powered

4321

4121 CL

0°-55°C / 32°-131°F

500,000 Hours

ExpressCard

54 mm

34mm

12 Mbps

Bus Powered

4040

PCMCIA

16 Mbps

PCMCIA