- ページ 5
コントローラー Automation Direct D0-05DRのPDF はじめにをオンラインで閲覧またはダウンロードできます。Automation Direct D0-05DR 13 ページ。
DirectSOFT universally supports the DirectLOGIC CPU families. This means you can use the
full version of DirectSOFT to program DL05, DL06, DL105, DL205, DL305, DL405 CPUs.
The DirectSOFT Programming Software User Manual discusses the programming language in
depth. DirectSOFT version 2.4 or later is needed to program the DL05.
Handheld Programmer
All DL05 Micro PLCs have built-in programming ports for use with the handheld programmer
(D2–HPP), the same programmer is used with the DL06 and DL205 families. The handheld
programmer can be used to create, modify and debug your application program. A separate
manual discusses the handheld programmer. The D2–HPP requires firmware version 1.09 or
later to program the DL05.
NOTE: Not all program instructions are available to use with the HHP, such as the DRUM instruction. Use
DirectSOFT for these instructions.
I/O Selection Quick Chart
The eight versions of the DL05 have Input/Output circuits which can interface to a wide
variety of field devices. In several instances a particular Input or Output circuit can interface
to either DC or AC voltages, or both sinking and sourcing circuit arrangements. Check this
chart carefully to find the best suited DL05 Micro PLC to interface with the field devices in
your application.
DL05 Part
I/O type/
Number
commons
D0–05AR
AC / 2
D0–05DR
DC / 2
D0–05AD
AC / 2
D0–05DD
DC / 2
D0–05AA
AC / 2
D0–05DA
DC / 2
D0–05DR–D
DC / 2
D0–05DD–D
DC / 2
* See Chapter 2 Specifications for your particular DL05 version.
I/O Selection Chart
INPUTS
Voltage
Sink/Source
Ranges
–
90 – 120 VAC
Sink or Source
12 – 24 VDC
–
90 – 120 VAC
Sink or Source
12 – 24 VDC
–
90 – 120 VAC
Sink or Source
12 – 24 VDC
Sink or Source
12 – 24 VDC
Sink or Source
12 – 24 VDC
DL05 Micro PLC User Manual, 6th Edition, Rev. E
Chapter 1: Getting Started
OUTPUTS
I/O type/
Sink/Source
commons
Relay / 2
Sink or Source
Relay / 2
Sink or Source
DC / 1
Sink
DC / 1
Sink
AC / 2
–
AC / 2
–
Relay / 2
Sink or Source
DC / 1
Sink
Voltage/ Current Ratings
6 – 27VDC, 2A*
6 – 240 VAC, 2A *
6 – 27VDC, 2A*
6 – 240 VAC, 2A *
6 – 27 VDC, 0.5A (Y0–Y2)
6 – 27 VDC, 1.0A (Y3–Y5)
6 – 27 VDC, 0.5A (Y0–Y2)
6 – 27 VDC, 1.0A (Y3–Y5)
17 – 240 VAC, 47 – 63 Hz, 0.5A*
17 – 240 VAC, 47 – 63 Hz, 0.5A *
6 – 27 VDC, 2A
6 – 240 VAC, 2A *
6 – 27 VDC, 0.5A (Y0–Y2)
6 – 27 VDC, 1.0A (Y3–Y5)
1-5