ページを印刷する
USING THE
BLUETOOTH
REMOTE
1
To insert or replace the battery, place your thumb in the center
of the back cover, pressing inward and sliding downward
remove the battery door. The CR2032 battery should be
inserted with the positive (+) side facing upward. Replace the
cover.
4
Open your camera app. Press the button on the remote to
trigger the shutter on your phone.
8
2
Press and hold the button on the remote for 5 seconds. A blue
light will turn on and, after a few seconds, start to blink. The
remote is now in pairing mode.
5
If your camera is in video mode, you can press the button
once to start recording and again to stop the recording.
3
Using the Bluetooth settings on your phone, pair the device
called "GBshutter".