ページを印刷する
Powering
Trusted Identities
2.2 IPA cleaning card routine
Video link:
https://player.vimeo.com/video/654620130
The following diagram shows the location where the IPA cleaning card is inserted into the printer.
1. Using the key, open the printer front door and remove the input hopper.
2. Remove the long IPA card from its packaging.
3. Feed the card into the feed rollers using the onscreen forward and backward buttons.
a. Make sure to keep a hold of the end of the card.
b. When the card is all the way into the printer, continue pressing the forward button to allow the rollers to rotate
over the now stationary cleaning card.
c. Repeat this a few times to ensure the rollers are clean.
4. Close the printer front door.
5. Place the input hopper back in place.
PLT-06360, A.0
8
HDP®600ii Recommended Maintenance
February 2022
Manual