- ページ 6

ワイヤレスルーター Dynalink QWLL100のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Dynalink QWLL100 8 ページ。 Wlan usb adaptor

WLAN USB Adaptor Quick Set-up Guide

administrator. Only if you are setting up a new network there is the option on

the WEP setting.

Before you start you should know:

The type of encryption, 64 or 128-bit.

The encryption keys.

The key number to be used.

These settings must be identical to those on the access point or wireless stations.

If the network uses no encryption, go to Encryption and check that the setting

is disabled.

If the network is protected by WEP:

Select Encryption from the

Wireless LAN Configuration

Utility.

Choose 64 or 128 Bit encryption.

Enter the WEP keys in either

Alphanumeric characters or

Hexadecimal digits. The four

keys, including the one selected

as WEP Key to use, are used to

decrypt the data you receive.

In the Use WEP Key box, select

the key number to encrypt data.

Click Apply to finish.

4.2

MAC ADDRESS FILTERING OR ASSOCIATION CONTROL

Some access points block access from unauthorised clients by registering the

MAC address of all authorised clients. If the network uses this function you must

supply the MAC address of your adaptor to the network administrator for inclusion

into the access point. The MAC address of your adaptor is printed on a small

label affixed to the product. The label reads 0020E0xxxxxx. 0020E0 is the first

half of the address.

Removing the wireless adaptor from computer

It is recommended that you follow the standard Windows procedure for

disconnecting a USB device from your computer.

Double click the Safely Remove Hardware icon on system tray.

Select the device, click Stop and then OK.

When the safe to remove message is displayed, click OK and remove device.