- ページ 4

エクステンダー Dynalink A 3217CのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dynalink A 3217C 6 ページ。 Hdmi & infra-red cat5e/6 extender utp balun

Panel Description

Transmitter Panel

1 . HDMI Output.

2 . EDID copy button.

3 . Status of power input. When power input on, the LED lights.

4 . Status of signal connection. When this works well, the LED lights.

5 . CAT-5E/6 output.

6 . IR TX.

7 . IR RX.

8 . HDMI Input.

9 . Power input, 5VDC.

Note1:

When the sink can't display the signal, try to connect HDMI output port of the transmitter to the display

device. Plug the power supply into Transmitter, press the "EDID copy button" and the light flashes, the

EDID data has been copied from the display device successfully, at least press "EDID copy button" for

3 seconds, The EDID will be reset to the default setting.

Note2:

The distance is 40m under 5.1CH or 7.1CH.

Receiver Panel

1 . Status of signal connection. When this works well, the LED lights

2 . Status of power input. When power input on, the LED lights

3 . CAT-5E/6 input

4 . IR TX

5 . IR RX

6 . HDMI output

7 . Power input, 5VDC.

HDMI Output

(1)

HDMI Extender over single Cat5e/6 cable

Operating Instructions